Used Gantry-high-bed Portal Miller FOOKE ENDURA 704 LINEAR

Guides, drive and measuring systems:

• All linear axes with linear motors make SIEMENS - water-cooled
• Both rotary axes of the milling head with torque motors
• Direct measuring systems for X, Y and Z axes made by HEIDENHAIN
• X-, Y- and Z-axis guidance by means of high-precision linear guides for highest precision and dynamics

Chip conveyor:

• 1 pc. hinged belt chip conveyor installed in Y-direction in front of the machine table
• Drop-off height approx. 1.100 mm

Coolant equipment make KNOLL 450 S-2:

• Tank volume approx. ca. 950 l
• Internal coolant supply max. 40 l/min 60 bar
• External coolant supply max. 70 l/min 10 bar

Equipment & accessories:

• Highly dynamic Gantry-high-bed Portal Milling Machine in compact design Portal moving in X direction
• Machine bed in rigid cast iron, side walls, cross slide and portal as welded steel construction, walking beam in cast iron.
• Foundationless installation of the machine. Due to the inherently rigid machine bed, only a standard industrial floor, approx. 300 mm thick, steel-reinforced, is sufficient for installation. A special foundation, however, is not required. The machine is installed and aligned by means of fixators with anchor bolts.
• The linear axes (X,Y,Z) are equipped with water-cooled linear motors made by SIEMENS. The X-axis is designed as a GANTRY-axis.
• The linear and rotary axes are equipped with direct measuring systems.
• The Z-axis drive is supported by highly dynamic pneumatic cylinders (weight compensation).
• The linear axes are equipped with a safety system which brakes and safely holds the axes in case of voltage loss. The linear axes are equipped with hardened and ground, backlash-free preloaded linear-guideways.
• The guideways are protected by bellows.
• All guideways as well as the counterbalance cylinders, which have to be lubricated with grease or oil, are equipped with catching systems so that excess lubricant is collected in a controlled manner and the workpieces cannot be contaminated. The workroom is closed all around.
• A top cover prevents dust form escaping unhinderd from the work area and also limits the upward flight of chips.
• The front part of the cover (loading side of the machine) can be manually unlocked or locked so that the machine can be loaded and unloaded by crane or forklift truck.
• The working area is illuminated with fluorescent tubes (IP 54, protected against water jets and solid foreign bodies).
• 2-axis simultaneous fork-milling-head No. 4
• High frequency milling spindle make FISCHER, 24.000 min-1, HSK 63
• CNC-control HEIDENHAIN iTNC 530 HSCI
• Portable electronic hand wheel (radio)
• 68-fold tool changer
• Compact coolant system make KNOLL
• 3-D radio probe make M&H, Type 20.41 MULTI
• Laser tool control system HEIDENHAIN, Type TL Micro 300
• Emulsion mist exhausting system
• Prepared for additional external exhausting system
• Chip conveyor
• Milling head mechanics overhauled
• Change of milling spindle on 25.Oct.2018 at 9.911 spindle hours
• Operating hours: control ON 38.595 h, Machine ON 32.535 h, Prog.Run 13.390 h, Spindle 13.466 h, Axes 13.230 h