used Machining Centre MATEC 30 HV/K
| manufacturer: | MATEC |
| type: | 30 HV/K |
| built: | 2007 |
| travels X-Y-Z: | 1.300 x 600 x 800 mm |
| control: | HEIDENHAIN iTNC 530 |
The machining center with 5 axis Matec 30HV/K in performance class HSK-A 63 is equipped with a Heidenhain iTNC530 control.
The short version of this vertical center has a swivelling spindle head and a rotary table with a diameter of 630 mm integrated into the worktable.
The selected axis arrangement therefore permits full 5-sided machining.
The reinforced main spindle with a drive power of 30 kW and the tool changing system with 46 seats round off the top end of the performance package.
Technical Equipment / Features
- 5-sided machining
- X-Y-Z axis 1300x600x800 mm
- NC-rotary table diameter 630 mm embedded in machine table with torque drive
- reinforced main spindle 30 kW, 15.000 min-1
- 46-fold tool magazine
- internal coolant supply
- direct measuring system in all axes
- chip conveyor
- electronical handwheel
- coolent equipment manufacturer MAYFRAN
- compressed air at the outer nozzles
- internal coolant compressed air through the tool
- oil mist extraction system
- electrostatic air filter, vertical, with motor and blower, air capacity approx. 1.000 m3/h, total power 300 W
- 3D-measuring probe with radio signal transmission
- hydraulic unit 400bar
- pneumatic connection with maintenance unit