| manufacturer: | SHW |
| type: | UFZ 6 |
| built: | 2003 |
| travels X-Y-Z: | 7.000 x 2.600 x 1.600 mm |
| control: | HEIDENHAIN iTNC 530 |
Offer Data
CNC-Travelling Column Milling Machine, in very good condition
travels
| x-axis: | 7.000 mm |
| y-axis(vertical): | 2.600 mm |
| z-axis: | 1.600 mm |
feed rate
| x-axis stepless: | 2-36.000 mm/min |
| y- and z-axis stepless: | 2-24.000 mm/min |
rapid traverse
| x-axis: | 36.000 mm/min |
| y- and z-axis: | 24.000 mm/min |
orthogonal milling head
| tool taper: | SK 50, DIN 69871 B50 |
| min./max. spindle speed: | 32-4.000 min-1 |
| power S1 operation: | 37 kW |
| power S4 operation: | 54 kW |
| max. torque in S1-operation: | 1.150 Nm |
| max. torque in S4-operation: | 1.700 Nm |
| gear steps: | 2 |
| autom. milling head indexing: | 1° in both head axes |
| (360° rear level, 180 ° front level) | |
| autom. workpiece clamping: | clamping force 25.000 N |
floor plate
| surface: | special cast iron |
| T-nuts DIN 650: | 28 mm H12, distance 250 mm |
| size: | 6.000 x 3.000 x 300 mm |
clamping table
| surface: | special cast iron |
| T-nuts DIN 650: | 22 mm H7 on front (2 pieces) |
| nuts distance upside of edge: | 140/80 mm |
| size: | 2.500 x 1.500 x 800 mm |
clamping angle
| size height x width x depth: | 3.000 x 2.500 x 1.500 mm |
| t-nuts: | 28 H 12 |
| self-weight: | ca. 12.000 kg |
| payload: | max. 5.000 kg |
tool changer
| change position: | horizontal |
| tool place: | 66 |
| tool diameter (all places engaged): | max. 125 mm |
| tool diameter (neighbour places free): | max. 250 mm |
| tool length: | max. 400 mm |
| tool weight: | max. 25 kg |
| pure tool change time: | ca. 10 sec. |
CNC-control
HEIDENHAIN iTNC 530
measuring and weight
| L x W x H : | 19 x 7,3 x 5,9 mm |
| weight: | ca. 40.000 kg |
| operating voltage: | 400 V, 50 Hz |
| total connected load: | 80 kVA |
| main fuse: | 160 A |
Accessories
| angle plate GGG 25 3.000 x 2500 x 150 mm additional table 2.500 x 1.500 x 800 mm floor plate 6.000 x 3.000 x 300 mm coolant equipment with external and internal coolant supply paper band filter unit with volume 500 l collision control BRANKAMP coolant unit for stabilization of the operation temperature in spindle stock 66-fold automatic tool changer metering operating hours milling spindle 3.900 h program run 7.930 h |